Abstract
Three-dimensional self-organized nanoporous thin films integrated into a heterogeneous Fe2O3/Fe3C-graphene structure were fabricated using chemical vapor deposition. Few-layer graphene coated on the nanoporous thin film was used as a conductive passivation layer, and Fe 3C was introduced to improve capacity retention and stability of the nanoporous layer. A possible interfacial lithium storage effect was anticipated to provide additional charge storage in the electrode. These nanoporous layers, when used as an anode in lithium-ion batteries, deliver greatly enhanced cyclability and rate capacity compared with pristine Fe2O 3: a specific capacity of 356 μAh cm-2 μm -1 (3560 mAh cm-3 or ∼1118 mAh g-1) obtained at a discharge current density of 50 μA cm-2 (∼0.17 C) with 88% retention after 100 cycles and 165 μAh cm-2 μm -1 (1650 mAh cm-3 or ∼518 mAh g-1) obtained at a discharge current density of 1000 μA cm-2 (∼6.6 C) for 1000 cycles were achieved. Meanwhile an energy density of 294 μWh cm -2 μm-1 (2.94 Wh cm-3 or ∼924 Wh kg -1) and power density of 584 μW cm-2 μm-1 (5.84 W cm-3 or ∼1834 W kg-1) were also obtained, which may make these thin film anodes promising as a power supply for micro- or even nanosized portable electronic devices.
Original language | English (US) |
---|---|
Pages (from-to) | 3939-3946 |
Number of pages | 8 |
Journal | ACS Nano |
Volume | 8 |
Issue number | 4 |
DOIs | |
State | Published - Apr 22 2014 |
Externally published | Yes |
Keywords
- anode
- heterogeneous structure
- lithium-ion battery
- nanoporous
- thin film
ASJC Scopus subject areas
- General Materials Science
- General Engineering
- General Physics and Astronomy