Filter
Conference contribution

Search results

  • 1988

    On the optimal location and number of intercoolers in a real compression process

    Vadasz, P., Pugatsch, J. & Weiner, D., 1988, Proceedings of the ASME Turbo Expo. American Society of Mechanical Engineers (ASME), Vol. 4.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 1991

    Conceptual engineering of a 300-MW CAES plant part 1: Cost effectiveness analysis

    Nakhamkin, M., Swensen, E. C., Abitante, P. A., Whims, M., Weiner, D., Vadasz, P. & Brokman, S., 1991, Heat Transfer; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Open Access
  • Multidisciplinary modeling and design of a space system

    Tester, J. T. & Robinson, D. G., 1991, IEEE International Conference on Systems Engineering. Publ by IEEE, p. 446-449 4 p. (IEEE International Conference on Systems Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • 1999

    Acoustic oscillations in a cylindrical chamber with a hub baffle

    Acker, T. L., Mitchell, C. E. & Cody, J. D., 1999, 5th AIAA/CEAS Aeroacoustics Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, p. 1112-1122 11 p. AIAA 99-1971. (5th AIAA/CEAS Aeroacoustics Conference and Exhibit).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Scopus citations
  • 2002

    Radiative properties of polar bear hair

    Preciado, J. A., Rubinsky, B., Otten, D., Nelson, B., Martin, M. C. & Greif, R., 2002, Advances in Bioengineering. American Society of Mechanical Engineers (ASME), p. 57-58 2 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    11 Scopus citations
  • 2003

    Algorithm dependence of the weak turbulent solution in porous media convection

    Vadasz, P., 2003, Proceedings of the 003 ASME Summer Heat Transfer Conference, Volume 1. American Society of Mechanical Engineers, p. 479-485 7 p. (Proceedings of the ASME Summer Heat Transfer Conference; vol. 2003).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Combining renewable energy and design-for-manufacturing research in an undergraduate research project

    Tester, J., 2003, Proceedings - Frontiers in Education Conference, FIE. Institute of Electrical and Electronics Engineers Inc., Vol. 3. p. S1E10-S1E15 1265921

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Metabolic mass transfer effect in monotonic and non-monotonic growth of micro-organisms

    Vadasz, P. & Vadasz, A. S., 2003, Proceedings of the 2003 ASME Summer Heat Transfer Conference, Volume 2. American Society of Mechanical Engineers, p. 809-816 8 p. (Proceedings of the ASME Summer Heat Transfer Conference; vol. 2003).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Temperature-dependence of water bridge formation in atomic force microscopy

    Nelson, B. A., Bottomley, L. A., Poggi, M. A. & King, W. P., Jan 1 2003, Micro-Electro-Mechanical Systems (MEMS) - 2003. American Society of Mechanical Engineers, p. 629-636 8 p. (American Society of Mechanical Engineers, Micro-Electromechanical Systems Division Publication (MEMS); vol. 5).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • 2004

    Reducing distortion in simulated injection-molded wind turbine blades

    Tester, J. T. & Hargroder, T., Jul 29 2004, Collection of ASME Wind Energy Symposium Technical Papers AIAA Aerospace Sciences Meeting and Exhibit. p. 24-31 8 p. (Collection of ASME Wind Energy Symposium Technical Papers AIAA Aerospace Sciences Meeting and Exhibit).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Transport in thermal DIP pen nanolithography

    Nelson, B. A., Wright, T. L., King, W. P., Sheehan, P. E. & Whitman, L. J., Jan 1 2004, Proceedings of the 3rd ASME Integrated Nanosystems Conference - Design, Synthesis, and Applications. American Society of Mechanical Engineers, p. 125-126 2 p. NANO2004-46074. (Proceedings of the 3rd ASME Integrated Nanosystems Conference - Design, Synthesis, and Applications).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2005

    Design and performance of a MR torque transfer device

    Molyet, K., Ciocanel, C., Yamamoto, H. & Naganathan, N., Dec 1 2005, Proceedings of the ASME Aerospace Division 2005. p. 295-301 7 p. (American Society of Mechanical Engineers, Aerospace Division (Publication) AD; vol. 70 AD).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Direct deposition of electronic materials with thermal DPN

    Sheehan, P. E., Yang, M., Laracuente, A. R., King, W. P., Whitman, L. J. & Nelson, B. A., 2005, Digital Fabrication 2005 - Final Program and Proceedings. p. 52-54 3 p. (Digital Fabrication 2005 - Final Program and Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Evaluation of a constitutive equation for magnetorheological fluids in shear and elongational flows

    Ciocanel, C., Lipscomb, G. & Naganathan, N. G., Dec 1 2005, Proceedings of the ASME Aerospace Division 2005. p. 101-109 9 p. (American Society of Mechanical Engineers, Aerospace Division (Publication) AD; vol. 70 AD).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Nanofluids suspensions: Possible explanations for the apparent enhanced effective thermal conductivity

    Vadasz, P., 2005, Proceedings of the ASME Summer Heat Transfer Conference, HT 2005. p. 613-623 11 p. HT2005-72258. (Proceedings of the ASME Summer Heat Transfer Conference; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    7 Scopus citations
  • On the effect of mechanical and thermal anisotropy on the stability of gravity driven convection in rotating porous media

    Govender, S. & Vadasz, P., Dec 1 2005, Proceedings of the ASME Heat Transfer Division 2005. 2 ed. p. 1-7 7 p. (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD; vol. 376 HTD, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2006

    A paradox of heat conduction in porous media subject to lack of local thermal equilibrium

    Vadasz, P., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Heat Transfer. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • A particle pair model for magnetorheological fluids

    Ciocanel, C., Lipscomb, G. & Naganathan, N. G., 2006, Smart Structures and Materials 2006 - Active Materials: Behavior and Mechanics. 61700S. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6170).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • A problem solving approach for teaching engineering laboratories

    Ciocanel, C. & Elahinia, M. H., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education. American Society of Mechanical Engineers (ASME), (Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • Characterization of the lightweight telescope developed for the NPOI

    Andrews, J. R., Penado, F. E., Broome, S. T., Wilcox, C. C., Restaino, S. R., Martinez, T., Teare, S. W. & Santiago, F., Oct 2 2006, Ground-based and Airborne Telescopes. 62673Q. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6267 II).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Scopus citations
  • Composite end-fittings for lightweight telescope applications

    Penado, F. E., Broome, S. T., Romeo, R. C., Martin, R. N., Clark, J. H. & Walton, J. A. P., Dec 1 2006, 38th SAMPE Fall Technical Conference: Global Advances in Materials and Process Engineering. (International SAMPE Technical Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Monotonic growth of motile microorganisms

    Vadasz, A. S., Andrade, A., Chen, K. Y., Vadasz, P., Cope, E., Leid, J. G., Dobbs, E. & Zavodnyik, S., 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Biomedical and Safety Systems. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Using an IR network in a robotic competition class

    Tester, J. T. & Hatfield, J., 2006, 36th ASEE/IEEE Frontiers in Education Conference, FIE. Institute of Electrical and Electronics Engineers Inc., p. 11-16 6 p. 4117097. (Proceedings - Frontiers in Education Conference, FIE).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2007

    Best practices in grid integration of variable wind power: Summary of recent US case study results and mitigation measures

    Smith, J. C., Parsons, B., Milligan, M. R., Acker, T., Zavadil, R., Schuerger, M. & Demeo, E., Dec 1 2007, European Wind Energy Conference and Exhibition 2007, EWEC 2007. p. 500-509 10 p. (European Wind Energy Conference and Exhibition 2007, EWEC 2007; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    16 Scopus citations
  • Calculation of the elastic properties of a triangular cell core for lightweight composite mirrors

    Penado, F. E., Clark, J. H., Walton, J. P., Romeo, R. C. & Martin, R. N., 2007, New Developments in Optomechanics. 66650B. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6665).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Design and analysis of a rotationally resistant floor for a telescope enclosure

    Wood, P. G., Penado, F. E., Clark, J. H. & Walton, J. P., Dec 1 2007, New Developments in Optomechanics. 66650J. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6665).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Design of asymmetrically loaded end-plates with vacuum seal surfaces for the navy prototype optical interferometer

    Walton, J. P., Clark, J. H. & Penado, F. E., Dec 1 2007, New Developments in Optomechanics. 666513. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6665).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • On the control of a MR torque transfer device

    Elahinia, M. H., Ciocanel, C., Molyet, K. & Naganathan, N., Dec 1 2007, Proceedings of the 10th International Conference on Electrorheological Fluids and Magnetorheological Suspensions. p. 326-332 7 p. (Proceedings of the 10th International Conference on Electrorheological Fluids and Magnetorheological Suspensions).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Optical mount modifications for increased articulation at the Navy Prototype Optical Interferometer

    Clark, J. H., Walton, J. P., Penado, F. E. & Smith, D., Dec 1 2007, New Developments in Optomechanics. 666512. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6665).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Pier vibration isolation for lightweight interferometry telescopes

    Wood, P. G., Penado, F. E., Clark, J. H. & Walton, J. P., 2007, New Developments in Optomechanics. 66650L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6665).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Rendering the transient hot wire experimental method to dual-phase applications

    Vadasz, P., 2007, Heat Transfer, Fluid Flows, and Thermal Systems. American Society of Mechanical Engineers (ASME), p. 1109-1116 8 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Squeeze-flow mode magnetorheological fluid mount

    Ciocanel, C., Ngwen, T., Elahinia, M. & Naganathan, N. G., Dec 1 2007, Proceedings of the 10th International Conference on Electrorheological Fluids and Magnetorheological Suspensions. p. 570-576 7 p. (Proceedings of the 10th International Conference on Electrorheological Fluids and Magnetorheological Suspensions).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Thermal calibration of heated silicon atomic force microscope cantilevers

    Nelson, B. A. & King, W. P., Dec 1 2007, TRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems. p. 607-610 4 p. 4300203. (TRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Yield stress predictions for magnetorheological fluids from a kinetic theory based particle pair model

    Ciocanel, C., Lipscomb, G. & Naganathan, N. G., 2007, Proceedings of the 10th International Conference on Electrorheological Fluids and Magnetorheological Suspensions. World Scientific Publishing Co. Pte Ltd, p. 299-305 7 p. (Proceedings of the 10th International Conference on Electrorheological Fluids and Magnetorheological Suspensions).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2008

    Design and modeling of a mixed mode magnetorheological (MR) fluid mount

    Ciocanel, C., Nguyen, T. & Elahinia, M., Jun 2 2008, Active and Passive Smart Structures and Integrated Systems 2008. 69281C. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6928).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    14 Scopus citations
  • Modeling and simulation of a magnetorheological mount

    Nguyen, T., Ciocanel, C. & Elahinia, M., Dec 1 2008, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. p. 819-824 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 5).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Mount-induced deflections in eight-inch flat mirrors at the Navy Prototype Optical Interferometer

    Clark, J. H., Penado, F. E., DiVitorrio, M. & Walton, J. P., Sep 26 2008, Optical and Infrared Interferometry. 70133K. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7013).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    8 Scopus citations
  • On the design and control of a squeeze-flow mode magnetorheological fluid mount

    Ciocanel, C., Schroeder, C., Nguyen, T. & Elahinia, M., Jun 13 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 1915-1922 8 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 1 PART C).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Parameter optimization in designing an MR mount

    Nguyen, T., Ciocanel, C. & Elahinia, M., Dec 1 2008, 15th International Congress on Sound and Vibration 2008, ICSV 2008. p. 315-322 8 p. (15th International Congress on Sound and Vibration 2008, ICSV 2008; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Performance of an adaptive magnetorheological fluid mount

    Ciocanel, C., Nguyen, T., Schroeder, C. & Elahinia, M. H., 2008, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2007. p. 261-268 8 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 10 PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • Torque control for a MR clutch

    Ciocanel, C., Molyet, K. E., Naganathan, N. G. & Elahinia, M. H., Dec 1 2008, 15th International Congress on Sound and Vibration 2008, ICSV 2008. p. 323-331 9 p. (15th International Congress on Sound and Vibration 2008, ICSV 2008; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • 2009

    A magnetorheological mount for hydraulic hybrid vehicles

    Nguyen, T., Elahinia, M. & Ciocanel, C., Dec 1 2009, Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2009, SMASIS2009. p. 551-555 5 p. (Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2009, SMASIS2009; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Analytical modeling and experimental validation of a magnetorheological mount

    Nguyen, T., Ciocanel, C. & Elahiniaa, M., Sep 7 2009, Active and Passive Smart Structures and Integrated Systems 2009. 72881D. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7288).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations
  • Analytical prediction of the transition to chaos in Lorenz system

    Vadasz, P., 2009, 2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis. p. 799-803 5 p. (2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Analytical prediction of the transition to chaos in porous media natural convection

    Vadasz, P., Sep 21 2009, 2008 Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE 2008. PART B ed. p. 1023-1027 5 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 10, no. PART B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • A study of biologically-inspired design as a context for enhancing student innovation

    Nelson, B., Wilson, J. & Yen, J., Dec 1 2009, 39th Annual Frontiers in Education Conference: Imagining and Engineering Future CSET Education, FIE 2009. 5350871. (Proceedings - Frontiers in Education Conference, FIE).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    19 Scopus citations
  • Convexity of models with directional distortional hardening and its computational implication

    Plesek, J., Feigenbaum, H. P. & Dafalias, Y. F., Dec 1 2009, Computational Plasticity X - Fundamentals and Applications. (Computational Plasticity X - Fundamentals and Applications).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Experiments and modeling of the magneto-mechanical response of magnetic shape memory alloys

    Feigenbaum, H. P. & Ciocanel, C., Dec 1 2009, Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2009, SMASIS2009. p. 519-527 9 p. (Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2009, SMASIS2009; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations
  • Impact of metabolic mass transfer on monotonic growth of micro-organisms

    Vadasz, P. & Vadasz, A. S., Sep 21 2009, 2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis. p. 187-194 8 p. (2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Mirror deformation versus contact area in mounted flat mirrors

    Clark, J. H., Penado, F. E. & Cornelius, F., 2009, Advances in Optomechanics. 74240C. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7424).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations